Session 3 Overview: Safety Analyses

Note: This training deck is primarily composed of instructional screenshots (numbered dialog boxes, toolbar callouts, field highlights). The text below preserves all extractable slide text — titles, bullet points, discussion/exercise headings, and table content. Where a slide is dominated by an unlabeled screenshot, only the caption and step-list text could be extracted; screenshot visual detail itself is not represented.

Session 3:

Safety Analyses

Using a MADE Model to generate key analyses from Safety & Risk Management domains

---

Session 3: Safety Analyses

SESSION 3 OUTLINE

3.1: Failure Mode & Effects Analysis (FMEA) 3.2: Criticality Analysis 3.3: Control Measures 3.4: Critical Item Analysis 3.5: Failure Conditions (FHA) 3.6: Common Mode Analysis (CMA) 3.7: Functional Fault Tree Analysis (FTA)

---

Session 3: Safety Analyses

SESSION 3 DISCUSSION

Session 3 will take place in the SRA module.

This session will focus on general safety assessments including:

   FMEA
   Criticality Analysis
   FMECA
   Failure conditions in FHA
   Common Mode Analysis
   Functional Fault Tree

---

Session 3: Safety Analyses

SESSION 3 SUMMARY

3.1: Failure Mode & Effects Analysis (FMEA) 3.2: Criticality Analysis 3.3: Control Measures 3.4: Critical Item Analysis 3.5: Failure Conditions (FHA) 3.6: Common Mode Analysis 3.7: Functional Fault Tree Analysis