Reporting

The MADE Report Wizard allows the user to generate reporting outputs based on the

type of analysis conducted.

To access the Report Wizard, select "Report → Report Wizard" from the Main

Menu.

The main reporting categories are listed below:

• MADE Module Report Categories including:
  • Criticality (FMECA) Reports
  • Maintainability (FMECA Maintainability Information) Reports
  • Failure Modes and Effects Analysis (FMEA)
  • Mission Profile Definition Report
  • Data Quality Analysis Report
• RAM Module Report Categories including:
  • Reliability & Availability Reports
  • Reliability-Centered Maintenance Reports
• PHM Module Reports including:
  • Sensor Set Reports
  • Test Point Reports

The table below provides a brief description of each report available in the report

wizard.

Category	Report Template	Standard/Source	Description
Criticality	CA	MIL-STD-1629A	Failure Mode Effects and Criticality Analysis (FMECA) reports are focussed on the failure modes of the model and potential effects and criticality of each failure mode. FMECA reports may use either a qualitative or quantitative analysis, and require the use of the criticality editor.
Criticality	FMECA	MIL-STD-1629A / Custom	This FMECA report is a composite report based upon the MIL-STD-1629A standard with additional fields capturing qualitative failure information. The report lists Failure Modes for each item in the system model that leads to the selected End Effect with additional fields capturing failure predictability and compensating provisions.
Criticality	FMECA (Fuzzy)	PHMT	The FMECA (Fuzzy, PHMT) report is a FMECA method that is tailored from the RPN method to better suit the MADE software. The FMECA (Fuzzy, PHMT) report lists the Failure Mode for each item in the system model that leads to the selected End Effect. This report depends on functions, flows, failure diagrams (if provided) and criticality data. The criticality method uses the typical RPN parameters (occurrence, severity, difficulty of detection) and additional model parameters (causal strength and probability of failure). The results are then converted into fuzzy linguistic terms according to fuzzy rule memberships stored in MADE preferences.
Criticality	FMECA (HRI)	Custom	The Failure Mode Effects and Criticality Analysis (Hazard Risk Index, Custom) report or FMECA (HRI, Custom) report is based on the HRI criticality method defined in ABR-6303, tailored by a customer for a MER process. This report is a variation on the standard HRI report that uses a unique Item ID and Failure Mode ID system, adds a mission effects column and identifies whether items should be carried forwards in the analysis process based on a criticality threshold.
Criticality	FMECA (HRI)	PHMT	The Failure Mode Effects and Criticality Analysis (Hazard Risk Index, PHMT) or FMECA (HRI, PHMT) report is based on the HRI criticality method defined in ABR-6303, tailored by PHMT for the MADE application. The FMECA (HRI, PHMT) report lists the Failure Mode for each item in the system model that leads to the selected End Effect. This report depends on functions, flows, failure diagrams (if provided) and criticality data.
Criticality	FMECA (RPN)	PHMT	The Failure Mode Effects and Criticality Analysis (Risk Priority Number, PHMT) or FMECA (RPN, PHMT) report is based on the RPN criticality method in SAE and AIAG standards, optimised by PHMT for the MADE application. The FMECA (RPN, PHMT) report lists the Failure Mode for each item in the system model that leads to the selected End Effect. This report depends on functions, flows, failure diagrams (if provided) and criticality data.
Criticality	FMECA (Maintainability Combined)	MIL-STD-1629A	This FMECA report is a combined report documenting failure data, criticality, and maintenance information. The report is based upon the MIL-STD-1629A standard and combines the FMECA (MIL-STD-1629A) and FMEA Maintainability Information (MIL-STD-1629A) reports. Failure Modes are listed for each item in the system model that leads to the selected End Effect with additional fields capturing failure predictability and compensating provisions.
Criticality	FMECA	MIL-STD-882	This FMECA report is a report based upon the MIL-STD-882 standard and the criticality methodology within. The report lists Failure Modes for each item in the system model that leads to the selected End Effect with associated risk of each failure.
Criticality	FMECA	AIAG, FMEA 4th Edn.	The Failure mode, effects analysis, FMECA (AIAG, FMEA 4th Ed.), report is based on the AIAG FMEA 4th Edition standard. Specifically, the report is based on the "Potential failure mode effects analysis (FMEA) reference manual, fourth edition". The report lists the Failure Mode for each item in the system model that leads to the selected End Effect. This report depends on functions, flows, failure diagrams (if provided), severity, occurrence, detection and RPN.
Criticality	FMECA	SAE J1739, Rev. AUG2002	The Failure mode, effects analysis, FMECA (SAE J1739, Rev. AUG2002), report is based on the SAE J1739 standard. Specifically, the report is based on the "SAE J1739 Revised AUG2002". The report lists the Failure Mode for each item in the system model that leads to the selected End Effect. This report depends on functions, flows, failure diagrams (if provided), severity, occurrence, detection and RPN.
Data Quality Analysis	Annotation Report	PHMT	The Annotation Report is the default report for model Annotations, and was not based on any particular standards. The Annotations Report provides a Data Quality Index based on the coverage, quality and resulting confidence in the data annotated through the model.The report also includes an overview of annotations by type, status and source, followed by a full listing of all active annotations in the model.
Failure Modes & Effects Analysis	FMEA	MIL-STD-1629A	The Failure Mode and Effects Analysis (MIL-STD-1629A) or FMEA (1629A) report is based on the MIL-STD-1629A standard. Specifically the report is based on Task 101, Figure 101.3 "FAILURE MODE AND EFFECTS ANALYSIS". The report lists the Failure Mode for each item in the system model that leads to the selected End Effect. The report depends on functions, flows, failure diagrams (if provided) and criticality data (severity classification).
Failure Modes & Effects Analysis	FMEA	AIAG, FMEA 4th Edn.	The Failure Mode Effects Analysis, FMEA (AIAG, FMEA 4th Ed.), report is based on the AIAG FMEA 4th Edition standard. Specifically, the report is based on the "Potential failure mode effects analysis (FMEA) reference manual, fourth edition". The report lists the Failure Mode for each item in the system model that leads to the selected End Effect. This report depends on functions, flows and failure diagrams (if provided).
Failure Modes & Effects Analysis	FMEA	SAE J1739, Rev. AUG2002	The Failure mode, effects analysis, FMEA (SAE J1739, Rev. AUG2002), report is based on the SAE J1739 standard. Specifically, the report is based on the "SAE J1739 Revised AUG2002". The report lists the Failure Mode for each item in the system model that leads to the selected End Effect. This report depends on functions, flows and failure diagrams (if provided).
Maintainability	FMECA MI	PHMT	The Failure Mode Effects and Criticality Analysis-Maintainability Information (MIL-STD-1629A) or FMECA-MI (1629A) report is based on the MIL-STD-1629A standard. Specifically the report is based on Task 103, Figure 103.1 "FAILURE MODE EFFECTS AND CRITICALITY ANALYSIS MAINTAINABILITY INFORMATION". The report lists the Failure Mode for each item in the system model that leads to the selected End Effect. This report depends on functions, flows, failure diagrams (if provided), detection methods and criticality (severity classification).
Maintainability	Maintenance Actions Report	PHMT	The Maintenance Actions Report lists all of the existing maintenance actions (from item maintenance properties) for each selected item in the report. The report includes all information associated with each maintenance action (e.g. name, description, type, tasks, personnel, spares and equipment). This report requires maintenance actions (in the maintenance properties) to be detailed for each selected item in the model.
Maintainability	Maintenance Actions Report (Abridged)	PHMT	The Maintenance Actions Report (Abridged) is a summarised version of the Maintenance Actions report and focuses on specific maintenance information from item maintenance actions selected by the user. The report includes the following Maintenance Actions fields: Item Name, Item Number, Maintenance Sub-type, Duration (MTTR) information, location of maintenance, Maintenance Action tasks (ID, Description, Duration), and Spares, Equipment & Consumables details (Item ID, Item Name, Quantity).
Maintainability	Maintenance Cost Estimates Report	PHMT	The Maintenance Cost Estimates report is a comprehensive report based on the MCE feature, tailored for the MADE software. The report displays all of the information for a MCE analysis including a cost summary, maintenance type breakdown, maintenance cost breakdown, maintenance supplier breakdown, maintenance country breakdown, maintenance cost summary and a section for the cost estimates for each maintainable item.
Mission Profile Definition	MEFL	PHMT	The Mission Effective Functions List or MEFL report is a PMHT report that details the components for a capability in a Mission Profile Definition. The report includes Mission Objectives, a Time Profile, Key Mission Parameters and a Mission Analysis that details the functional importance and required items for each capability.
Mission Profile Definition	Mission Profile Report	PHMT	This report presents the general outcomes of a selected Mission Profile Definition (MPD) including the mission details, operating scenarios, defined objectives and capabilities, and Duty Cycles.
Mission Profile Definition	Operating Environment Report	PHMT	The Operating Environment Report presents an analysis of a single selected Operating Environment. Outlined are the conditions described in a single selected Operating Environment. An Operating Environment is described using Environmental Factors that may act within that Operating Environment. Each factor will have been assigned a weighting consistent with its magnitude within that Environment and a written narrative qualifying/justifying that weighting.
Mission Profile Definition	Operating Environment Comparison Report	PHMT	The Operating Environment Comparison Report presents a comparative analysis of a two or more selected Operating Environments in terms of the differences between their Environmental Factors. The report will include an overview of the comparison and an associated Environmental Loading Factor (i.e. change factor between the Environments). Outlined are the conditions described in each Operating Environment and a comparison between An Operating Environment is described using Environmental Factors that may act within that Operating Environment. Each factor will have been assigned a weighting consistent with its magnitude within that Environment and a written narrative qualifying/justifying that weighting.
Prognostics & Health Management	Test Point Report	PHMT	The Test Point Report is a comprehensive report based on a Test Point for an item, tailored for the MADE software. This report includes all of the information in the Test Point editor, including an overview, coverage details, sensor details and sensor parameters.
Prognostics & Health Management	Sensor Set Details Report	PHMT	The PHM report is a comprehensive report based on the sensor analysis process (user-defined or automated) in the PHM module. The report includes all of the information for the selected sensor sets including diagnostic sets, ambiguity groups, exclusions and sensor parameters.
Reliability & Availability	Reliability Block Diagram Report	PHMT	The Reliability Block Diagram/Availability Block Diagram or RBD/ABD report is PHMT defined and based on the RBD or ABD models in MADE. This report includes Failure Rates, MTTR, Grouping Types, Reliability and Availability information, including screenshots of the RBD/ABDs.
Reliability & Availability	Reliability Allocation Report	PHMT	The Reliability Allocation report documents the results of a Reliability Allocation Analysis produced in MADE. The report includes Target Reliability, Minimum Allocated Reliability, Duration of Operation and Maximum Allowable Failure Rate for each model element and RBD group in the system.
Reliability-Centered Maintenance	Back-Fit RCM Report	PHMT	The Back-Fit Reliability-centered Maintenance (PHMT) or Back-Fit RCM (PHMT) report is a comprehensive report based on the Back-Fit RCM, tailored for the MADE software. This report details all the steps of the Back-Fit process including a summary of all selected components, a summary of system maintenance and the component details (Back-Fit process) for each selected item.
Reliability-Centered Maintenance	Classic RCM Report	PHMT	The Reliability-centered Maintenance (RCM) or RCM (PHMT) report is a comprehensive report based on the Classic RCM II process, tailored for the MADE software. This report details all steps of the process including assigned maintenance actions, decision trees and the item maintenance overview.