FMECA (Fuzzy, PHMT)

The FMECA (Fuzzy, PHMT) report is a FMECA method that is tailored from the RPN method

to better suit the MADE software. The FMECA (Fuzzy, PHMT) report lists the Failure Mode

for each item in the system model that leads to the selected End Effect. This report

depends on functions, flows, failure diagrams (if provided) and criticality data. The

criticality method uses the typical RPN parameters (occurrence, severity, difficulty of

detection) and additional model parameters (causal strength and probability of failure).

The results are then converted into fuzzy linguistic terms according to fuzzy rule

memberships stored in MADE preferences.

[Image: FMECA-Fuzzy.png]

Analysis Options

The user sets the end effect item according to the expected system output required

by selecting an element from the provided end effect item list followed by selecting

the "Set End Effect Item" button or from the system model, followed by

selecting the "Next" button. (alternatively, right-click on a selected item

in the system model and select "End Effect Item" from the menu).

[Image: AnalysisOptions.png]

Report Body Customization

The next page following Analysis Options will help define the report formatting

including page size, orientation and a customizable page footer.

[Image: ReportCustom.png]

Cover Page Details

The Cover Page Organisation Details page following Analysis Options will help define

the report formatting including page size, orientation and a customizable page footer.

[Image: OrganizationDetails.png]

Sample Report

[Image: FMECA-Fuzzy.png]