MADE Reports - Criticality

Failure Mode Effects and Criticality Analysis (FMECA) reports are focussed on the

failure modes of the model and potential effects and criticality of each failure mode.

FMECA reports may use either a qualitative or quantitative analysis, and require the

use of the criticality editor. All FMECA reports depend on the model functions, flows,

failure diagrams (if provided) and criticality editor.

The links to criticality report types in MADE are listed below:

• CA (MIL-STD-1629A, Quantitative Standard)
• FMECA (MIL-STD-1629A, Custom)
• FMECA (Fuzzy, PHMT)
• FMECA (HRI, Custom)
• FMECA (HRI, PHMT)
• FMECA (RPN, PHMT)
• FMECA - Maintainability Combined (MIL-STD-1629A)
• FMECA (MIL-STD-882)
• FMECA (AIAG, FMEA 4th Ed.)
• FMECA (SAE J1739, Rev. AUG2002)