Sensor Set Diagnostics

The diagnostics sets of a Sensor set display failure diagnosis based on Sensor

analysis. All Sensor Sets maintain their Diagnostics (when the coverage of the sensor

set is lower than 100%, the sensor set will also show ambiguity groups).

Accessing Sensor Set Diagnostics:

1. Select "Diagnostics Analyses" under "Analyses" in the Main Menu.
2. Create a new or open an existing Diagnostics Analysis.
3. Select "Diagnostic Sets" in the options on the left.
4. View Sensor Sets using Tree view, List view and Rule view.

[Image: SensorSetDiagnostics.gif]

There are several viewing options in Diagnostics view:

• Tree View: Displays the Diagnostics Sets grouped according to Diagnosed Failure Mode. Analysis results presented in a Component based Tree. [Image: TreeView.png]

• List View: Displays the Diagnostics in a list. This view allows for quick sorting and comparisons. [Image: ListView.png]

• Rules View: Displays the Logical Rules for all Diagnosable Failures. Rules are presented with a Component based Tree formant for easy navigation. [Image: RulesView.png]

All diagnostics views will highlight selected Diagnostics responses for the assigned

Sensor Set on the System model.

Diagnostics Sets Options:

• : Minimize diagnostics rules for the current sensor set. [Image: Calculator.png]
• : Exports Propagation Table to CSV file. [Image: Export.png]
• : Exports Propagation Table with numeric responses (High=1, Nominal=0, Low=-1) [Image: NoExport.png]